Mulshi Dam and Lake Guide: Tata’s 1927 Dam, the Mulshi Satyagraha, Best Season and Day Trip From Pune
Mulshi dam on the Mula river was opened in 1927 to power Tata’s Bhira station. A guide to its history, best season, route from Pune and safety tips.

Photo: Abhishek Pathak / CC BY-SA 3.0, via Wikimedia Commons
Last updated: 22 November 2026
Mulshi dam, west of Pune on the Mula river, holds back a large reservoir surrounded by Sahyadri hills. It is one of the easiest nature escapes from the city, and it also has a remarkable history linked to India’s early hydropower and to a farmers’ movement.
Quick facts
- River: Mula
- Built by: Tata, opened in 1927
- Purpose: Supplies water to Tata Power’s Bhira hydroelectric station and for irrigation
- Dam size: About 48.8 m high and 1,533 m long
- From Pune: About a two-hour drive, via Paud
History of Mulshi dam
According to Wikipedia’s entry on the dam, Tata built the dam and opened it in 1927. Water from the reservoir is sent down the ghats to the Bhira power station in Raigad district, which today has an installed capacity of about 300 MW.
The project also led to one of Maharashtra’s early peasant movements. The Mulshi Satyagraha, from April 1921 to December 1924, was led by Pandurang Mahadev Bapat and Vinayak Bhuskute on behalf of farmers whose land was being taken for the dam. Bapat came to be known as Senapati Bapat, and Pune’s Senapati Bapat Road is named after him.
What to see and do
- The reservoir: Wide views of the lake ringed by hills, best in the early morning
- Drive along the backwaters: The road beyond Mulshi runs along the water towards Tamhini
- Villages and farm stays: The area has many resorts and homestays for an overnight trip
- Tamhini Ghat: Continue west for the forest drive down to the Konkan. Read our Tamhini Ghat guide.
Best season
Wikipedia lists August to October as the best time, when the hills are green and the reservoir is full. Winter mornings in November and December are misty and calm. Summer can be hot and the water level drops.
Safety tips
- Do not enter the reservoir water. It is deep, and drowning incidents at dams near Pune are reported often.
- Follow local bans on swimming and boating in unauthorised spots.
- The dam structure itself is not open for walking. Stay at viewpoints.
- Drive carefully on narrow village roads, especially after dark.
- Carry back all plastic and waste.
How to reach Mulshi from Pune
From Kothrud or Chandani Chowk, take the Paud road west. The route passes Pirangut and Paud before reaching Mulshi. Buses run from Pune to Paud and Mulshi villages, but a private vehicle is more practical for exploring.
Plan your day
Leave Pune early, have breakfast at Paud, spend the morning at Mulshi, and continue to Tamhini or return by afternoon. For more trips, see our weekend getaways near Pune guide and our explainer on the dams that supply Pune’s water.
Frequently asked questions
When was Mulshi dam built?
Mulshi dam was built by Tata and opened in 1927.
Which river is Mulshi dam on?
The Mula river.
What was the Mulshi Satyagraha?
A farmers’ movement from 1921 to 1924, led by Senapati Bapat, against land acquisition for the dam.
What is the best time to visit Mulshi?
August to October, when the reservoir is full and the hills are green. Winter mornings are also pleasant.
